Siemens Sinamics G120P Operating Instructions Manual page 137

4.
• When selecting "No (enter motor code)"
5a. Select the motor type.
6a. Enter the motor code number.
• When selecting "Yes (enter motor code)"
5b. Select the motor type.
6b. Select the frequency for your inverter and the connect-
7b. The wizard requests the data appropriate for the con-
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
Select as to whether you manually enter the motor data
from the motor rating plate or you enter a motor code.
The selection of the motor type is used to pre-assign
specific motor parameters and to optimize the operat-
ing characteristics and behavior. Details are described
in the List Manual in the p0300 parameter.
Then jump to Step 15.
The selection of the motor type is used to pre-assign
specific motor parameters and to optimize the operat-
ing characteristics and behavior. Details are described
in the List Manual in the p0300 parameter.
ed motor.
The use of the 87-Hz characteristic curve permits op-
eration of the motor with 1.73 times the normal speed.
nected motor. This data can be found on the motor
type plate.
Commissioning
5.3 Commissioning with the IOP
137