Danger to life during the motor identification for a rotating motor
The selection of the motor identification for a rotating motor causes the rotating
measurement to be performed after completion of the commissioning and the next drive
release.
During the rotating measurement, the drive will cause the motor to move until it reaches the
maximum motor speed.
This can result in death or severe physical injury.
• Ensure that the EMERGENCY STOP functions are functional during commissioning.
• Observe the relevant safety regulations to avoid danger to people and the machine.
⇒ Click on Continue >
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
WARNING
5.5 Procedure for commissioning via STARTER
Commissioning
165