Activating The Optional Functions - Siemens SINUMERIK 808D ADVANCED Commissioning Manual

9.
10.
11.
5.6

Activating the optional functions

The following optional functions can be purchased for the control system:
● Additional axes
● Contour handwheel
● Bidirectional leadscrew error compensation
● Manual Machine Plus (for the turning variant of the control system only)
● Transmit/Tracyl
● Gantry (BASIC)
● CNC lock
Note
Before activating the Manual Machine Plus function, make sure that MD20050 is set to default.
Note
The control system with PPU161.3/PPU160.2 supports up to two additional axes for the turning variant and one for the
milling variant. The control system with PPU141.2 supports one additional axis for the turning variant only.
To use a purchased option, you must first activate it with a license key on the control system. After you purchase the desired
option(s), you can obtain the corresponding license key from the Web License Manager.
Operating sequence
+
148
Press this softkey to confirm the archive information, and then the following message appears:
Press this softkey to confirm and start loading the archive. The control system restarts to com-
plete restoring the system language archive.
Power off/on the control system to activate the loaded language. Then you can find the new
system language and select it through the following operations:
+ →
1. Select the system data operating area.
2. Press this key to view the extended softkeys.
3. Open the dialog box for entering the license key through the following softkey operations:
→
Then you can find the serial number of the CF card in the following dialog box:
→
Commissioning Manual
01/2017