Resistance Sensor Type - Delphin Expert Logger Manual

Expert Logger
The example means: 0 mA corresponds to 0 l/h (litres per hour), 20 mA
corresponds to 1000 l/h.
Sensor type
Select the required fixed measuring range in
polar
/
unipolar
bipolar
Shunt
resistances for the current measurement. Contact us to obtain a suitable
resistance.
Scaling
Enter two points from the sensor's characteristic curve, if possible, the
lower and upper vertexes. For a linear characteristic, measurement values
are then converted into the unit of measurement (scaling) from the
sensor. For non-linear characteristics use
Sensor compensation
1000 l/h) is used as the default for the
The channel receives the status "scale range overrun" or "scale range
underrun" when not within the range. Channel status values are available
in the table in
4.10.1.3 Resistance sensor type
See also the
Expert Logger Manual
Januar 2018
bipolar Measuring range
settings in
: Measuring only positive signals.
: Measuring positive and/or negative signals.
: Enter the load resistance being used.
Current measurement is not possible without load res-
istance.
tab. The specified range (in the example 0 l/h to
Status monitoring
Advanced settings
Sensor type
.
Delphin
Sensor compensation
ProfiSignal
.
tab
95
uni-
or in the
offers various load
. See
graphic display area.
Delphin Technology AG