System Monitoring - Delphin Expert Logger Manual

Expert Logger
enables the output value to be manually set via the DataService Con-
figurator or automatically set via a
4.9.6
System monitoring
The system monitoring group collates individual settings, which you can
generate via the
tem information such as CPU load or memory usage.
Available system information
Selection
Total CPU
usage
Application
CPU usage
System CPU
usage
Available
memory
Used
memory
System
operating
time
Application
operating
time
Data stor-
age used
Free data
storage
Firmware
version
CPU tem-
perature
Delphin Technology AG
Info
You can also change the Power LED assignment. However, make sure
that the indication that the unit is on, can still be seen.
System monitoring
Display of total used processing power.
Display of processing power used by the main pro-
gram (data acquisition and calculation).
Display of processing power used by (operating) sys-
tem.
Displays how much free working memory is avail-
able.
Displays how much working memory is in use.
Display of time that the operating system has been
working, as in the time since the device was last
switched on.
Display of time that the main program has been
working, as in the time since
ation
or switching on or
Amount of memory already used for the data.
Amount of memory available for the data.
Device firmware version number.
Temperature of the CPU.
ProfiSignal
application.
software channel. This displays sys-
Description
Restart main applic-
Reboot
of the device.
72
Unit
%
%
%
MiB
MiB
Days
Days
MiB
MiB
—
°C
Expert Logger Manual
Januar 2018