Configuring Channels (Sensors) - Delphin Expert Logger Manual

Expert Logger
This option allows device login with the "Guest" username. So that anonym-
ous connection is possible, you must also enable the "Guest" user account
and specify the rights for this account. Anonymous login via the DataSer-
vice then always takes place, if either no user data for connection to a
device are provided, or the user data provided are invalid.
Factory set login data
Administrator
User:
Password:
Enable debugging
Enable this option only when requested to by
enables important information to be detected on the device, in the event of
a fault.
Standard unit for temperature
Specifies the default unit to be applied to temperature measurements. But
you can use different units for each channel. This specifies only the unit;
units are not converted.

4.10 Configuring channels (sensors)

Configuration of
device memory
Settings for all dialogs
See also
Expert
The
Analogue Input
l
Analogue output
l
Digital input
l
Digital output
l
Expert Logger Manual
Januar 2018
Once User management is activated, a connection to
the device can be established just by entering a valid
user name and password. Ensure that you have the
required login information before activating User man-
agement. Otherwise you will no longer be able to con-
nect to your device.
SUPERVISOR
For security reasons, change the Administrator and
root passwords in the device's
software channels
is described in separate sections.
Logger
device has the following I/O channels:
User management
Delphin
interfaces
, (for external devices) and
Overview Galvanic isolation
, ,
91
.
Support. This
Delphin Technology AG