Channel Group; Linearisation - Delphin Expert Logger Manual

Expert Logger
Generate intermediate values
between reset events immediately following their calculation, (without
being reset to zero).
Initial value
available channel whose current value will be used at the start via
or enter a constant value (
the value to be manually set via the DataService Configurator or auto-
matically set via a
4.11.9
Channel group
Use channel groups to group related or interdependent channels. Any num-
ber of channel groups may be created. If required, a channel can be linked
to more than one group (linked channels: refer to
channels).
4.11.10

Linearisation

Linearisation enables an additional conversion to be performed on a chan-
nel's values. An advantage of this feature is that the channel's original val-
ues remain available with the conversion being performed in a "new"
channel.
This dialogue enables either a conversion function to be set for this channel
Table type: local table
(
earisation table
option in the device's context menu.
Refer also to
Sensor compensation tab
Method
1. Select the table type.
For external tables, select the table to be used next; for internal tables, cre-
ate a table via the Table tab that is displayed after making your selection.
2. Select a source.
3. Set up a table if necessary (Table tab).
A table can be imported instead of creating a new one:
Delphin Technology AG
: Specify a value with which integration is to start. Select an
Manual value
ProfiSignal
Info
For activating Persistence in the Additional settings tab, each new
status will be stored and, for example, integration will continue from
there after a power outage. The choice for Initial value is then set to
Application. When loading a configuration file, too, the last value
stored is set as the initial value in this case.
Refer also to the "Additional settings tab" on page 48.
) or the use of a global linearisation function (
) which has been set up via the
Linearisation table (global)
.
: When enabled, results are also output
). Selecting
application.
Global linearisation table
Settings for all dialogues:
,
132
Channel
Application
enables
Configuring software
Import
.
Expert Logger
Januar 2018
,
Lin-
Manual