Configuring Interfaces - Delphin Expert Logger Manual

Expert Logger
The source (
delay time is controlled via a channel.
green
Curve) occurs at a
blocked for the duration of the reset signal.

4.12 Configuring interfaces

The device is equipped with multiple interfaces to enable communication
with external devices. These interfaces enable connection to other PCs,
PLCs, other third party equipment and sensors for data import or export.
Ethernet, CAN bus and COM interfaces are configured as with channels,
from the channel view of the DataService Configurator. The configuration
is described in this section.
Refer also to
on page 46
Configuring the ethernet interface for Modbus TCP
TCP/IP services
l
Modbus TCP server
l
Modbus TCP client
l
Modbus channel
l
Configuring the CAN bus interface
CAN connection
l
CAN protocol
l
CAN bus channel
l
Configuring the COM interfaces
COM connection
l
PROFIBUS protocol
l
PROFIBUS channel
l
PROFIBUS logger protocol
l
Modbus RTU protocol
l
Modbus RTU master
l
Modbus RTU slave
l
Expert Logger Manual
Januar 2018
purple
Triggers curve) triggers with a
High level.
"Network settings" on page 73
Retriggerable
black
The timer (
"Settings for all dialogues"
,
181
Rising edge
. The
is not active. Reset (
curve) is then
Delphin Technology AG