Tolerance Filter - Delphin Expert Logger Manual

Expert Logger
Selection
System CPU
usage
Available
memory
Used
memory
System
operating
time
Application
operating
time
Data stor-
age used
Free data
storage
Firmware
version
CPU tem-
perature
Core
voltage
Core RAM
voltage
Aux voltage
Battery OK
MiB = 1024 x 1024 byte (Mebibyte, actual storage capacity); MB = 1000 x
1000 byte (Megabyte). A hard disk with 500 MB (according to the man-
ufacturer) can therefore effectively only save 476 MiB (500,000,000/(1024
x 1024)).
4.11.26
Tolerance filter
The tolerance filter enables you to hide small (interference) signals. Values
are only output (relayed) if the set
Delphin Technology AG
Display of processing power used by (operating) sys-
tem.
Displays how much free working memory is avail-
able.
Displays how much working memory is in use.
Display of time that the operating system has been
working, as in the time since the device was last
switched on.
Display of time that the main program has been
working, as in the time since
ation
or switching on or
Amount of memory already used for the data.
Amount of memory available for the data.
Device firmware version number.
Temperature of the CPU.
CPU core voltage, diagnostic value.
Internal value for diagnostics only.
Internal value for diagnostics only.
Display whether the backup battery for the real-
time clock and the SRAM is working.
170
Description
Restart main applic-
Reboot
of the device.
tolerance
for the previously output
Unit
%
MiB
MiB
Days
Days
MiB
MiB
—
°C
V
V
V
—
Expert Logger Manual
Januar 2018