Pulse Generator - Delphin Expert Logger Manual

Expert Logger
Bandwidth
violation
itoring window" is symmetrical to the threshold. The value entered acts as
a subtraction to the window with
directions, and as an addition with
Example: Threshold = 50, bandwidth = 3
53 is monitored.
Delay
: The alarm condition must be me during the specified time to trigger
an alarm. The option is an alternative to the
cially suitable for suppressing false alarms for brief signal distortions with
high amplitudes. Both options can be combined.
Latching
condition is no longer met. Enabling
Reset trigger for latching. The alarm resets when a reset event occurs, e.g.
rising edge
a
alarm to reset when the alarm condition is still met.
Refer also to
4.11.7 Pulse generator
This software channel can be used in two different modes:
Free running: Continuous pulses are generated at a fixed repetition rate
l
(Cycle time) and at a set Pulse width.
Delphin Technology AG
: Sets the "monitoring window" for forms of monitoring:
steady condition
and
: The alarm is latched (continues to alarm) even when the alarm
in the given channel. The
Trigger options
Band monitoring/violation
. In
band monitoring
band violation
→
means the range from 47 to
Hysteresis
Latching
changes the field label in
Reset priority
.
122
Band
, the "mon-
in positive and negative
.
option and is espe-
option causes an
Expert Logger
Januar 2018
Manual