Can Protocol; Can Bus Channel - Delphin Expert Logger Manual

Expert Logger
The bit rate must be the same for transmission and reception. Therefore,
determine firstly the bit rate for the equipment communicated with and use
this value to set the CAN connection's bit rate.
The detail in brackets shows for which protocol this bit rate is available
(CiA = CAN in automation, DCP =
4.12.3.1 CAN protocol
Create a channel for the CAN protocol via the context menu
nel → CAN protocol (RAW)
The
Double-click the CAN protocol or select Properties from the context menu
to display the configuration dialogue. Use the dialogue to enter a name, loc-
ation and description for the CAN protocol.
4.12.3.2 CAN bus channel
A CAN bus input channel is identified by
by
CAN protocol
inputor CAN bus output in the CAN protocol context menu (
protocol), t o create channels.
Expert Logger Manual
Januar 2018
symbol is then displayed for the CAN protocol.
. CAN-bus channels are available only when a
have been configured. Select Create channel
Delphin
CAN protocol).
of the CAN connection.
and a CAN bus output signal
197
Create chan-
CAN connection
and
→
CAN bus
, CAN RAW
Delphin Technology AG