Delphin Expert Logger Manual page 159

Expert Logger
Table type Global table
: Use a global (external) table ( setting) that has
Setpoint table
been created for the device under Library (refer to
(global) Local table
) or define a table for a specific channel ( setting). In
Table
the latter case, a tab will appear.
Number of repeats
: Determine here whether and how often the program
sequence will be repeated automatically. After the last repeat, the final set-
point remains in the table.
Start Level Edge
: The state ( ) or edge ( ) of the specified channel starts the
program execution with the specified number of repetitions. Once the repe-
titions have been completed, a new or active start event then sets the pro-
grammer to the beginning and restarts the program sequence.
Pause
: Pauses the program's execution, i.e. the current setpoint is
Level
retained for as long as the specified channel has the set . The break
pause channel has a higher priority than the start channel, i.e. the start
Expert Logger Manual
Delphin Technology AG
159
Januar 2018