Device Restart (Reboot); Restart Measurement Data Acquisition (Restart Server) - Delphin Expert Logger Manual

Expert Logger
Reader is required. The Acrobat Reader can be downloaded cost-free from
Adobe
the
Example of a firmware changelog:
4.4.3.3 Device restart (reboot)
Restarts the device. The process takes approximately 2 minutes. After this
time, click
when the device is ready.
This has the same effect as switching the device off and on.
4.4.3.4
Restart measurement data acquisition (restart server)
Clicking
acquires and processes measurement data. This is faster than a
(full restart) of the device.
Delphin Technology AG
website.
Back
. The power LED (System LED) on the device indicates
Restart server
restarts the main program (application), which
During the restart, data is neither acquired nor stored.
The network connection to the device is interrupted and
re-established following the restart.
42
Reboot
Expert Logger Manual
Januar 2018