Delphin Expert Logger Manual page 148

Expert Logger
Controller 1 tab
Manual operation
and manual operation.
On/Off
: Give the source channel by which the switch between automatic
mode and manual operation is to occur. If a value is ≥ 1.0, the manual
value (see below) will be output as manipulated variable (y).
Manual value
D2 term (Td)
Delay time
controller from difference to time delayed difference. We recommend
enabling this option.
Delphin Technology AG
: Enable this option to switch between automatic mode
: Give the source value which delivers the "manual value".
: Optional second D term of controller.
: By enabling this option, you can switch the first D term of the
148
Expert Logger Manual
Januar 2018