Delphin Expert Logger Manual page 13

Expert Logger
DataService entry on the left of the window.
3. The device search takes place and a dialogue with the found device(s) is
displayed.
4. In the Add column, enable the device or devices that you want to connect
to. Then click Add.
If the device IP address does not correspond with that of your PC, you
must first assign a different network address. If no devices are found, for
example, if the scan required for searching (port 16555) is not permitted
in the network, you can either try a direct connection with your PC (with
no network) or the method described below for direct connection with PC
and fixed address.
5. If the device's User management is enabled, another dialogue opens.
Here, under username and password, enter your login data.
The successful connection is then displayed with IP address and status.
Expert Logger Manual
Januar 2018
13
Delphin Technology AG