Wwan (Option) - Delphin Expert Logger Manual

Expert Logger
3. Check that the PC is connected to the name given above under network
name (SSID).
Access Point
Specify the IP address and net mask to be used by the
Then set the
(mostly WPA2) and the
DHCP Server
Use this function to set up a DHCP server that assigns to all devices on the
network (
range of addresses to be made available.
Example
Start 192.168.240.10
:
addresses from 10 to 50 can be assigned, that is, 41 users can receive
addresses automatically.
The first three groups of digits must be identical for the start and end. The
maximum range possible goes from 1 to 255.
4.12.9
WWAN (option)
If the option is not available with your device, enter the data here for the
WWAN connection.
Expert Logger Manual
Januar 2018
SSID
, the password (
channel
Subnet
) a valid IP address. Enter a start and end address for the
End
,
To establish a WWAN connection, you must screw the
antenna(s) supplied onto the connections "MAIN" and
"AUX". The "AUX" connection is needed only if you wish
to use LTE with a maximum of bandwidth and trans-
mission speed. Otherwise, connecting one antenna to
"MAIN" will suffice.
Also plug the SIM card of your provider into the slot
above the antenna connections. The card's cut-off
corner must face right, as indicated by the symbol
above the slot.
PSK
, Preshared Key), the
Delphin
which the
192.168.240.50
:
245
Delphin
device.
encryption
device is to use.
. With this setting,
Delphin Technology AG