Shift Register - Delphin Expert Logger Manual

Expert Logger
Latching
condition is no longer met. The alarm has to be reset by a reset event. If
Latching
the
takes the state of the linked sources.
Enabling
when a reset event occurs, e.g., a rising edge in the given channel. The
Reset priority
still met.
Refer also to
Method
Select one or several channels to trigger a batch alarm from the Available
l
channels field and click to accept the selection.
Select one or several channels from Monitored channels and click to remove
l
the selection.
4.11.18 Shift register
The slider tab allows you to transmit values with delay.
Give the
values
) the delay is to affect. An entry from
when there are 100 values, to cause the first read value to be output. 100
values are always "reserved".
Use the
occurs.
Refer also to
Expert Logger Manual
Januar 2018
: The alarm is latched (continues to alarm) even when the alarm
option is not selected, the output for the batch alarm channel
Latching
changes
option causes an alarm to reset when the alarm condition is
"Trigger options" on page 54
Source
which is to be delayed and how many values (
Trigger
to establish that the delay only occurs if the trigger event
Reset
cancels the delay.
Trigger options
Reset trigger for latching
.
100
.
157
. The alarm resets
Number of
allows the 101 value,
Delphin Technology AG