Configuring The Expert Logger Device Via The Dataser- Vice Configurator - Delphin Expert Logger Manual

Expert Logger
Baud rat
e
The baud rate states the number of characters transferred per second via
the interface. Selection depends on the properties of the connected
devices and the cable length between the devices: For longer lines, a lower
baud rate should be selected to achieve error-free communication.
The following rates can serve as a guide:
from 15 m: 1000 kbaud (standard setting)
l
up to 30 m: 500 kBaud
l
up to 45 m: 333.3 kbaud
l
up to 60 m: 250 kBaud
l
up to 150m: 100 kbaud
l
4.6 Configuring the
vice Configurator
The next level in the
channels, the System monitoring, the I/O channels, the interfaces and the
memory.DataService Configurator In the
after the software channels, the System monitoring, the different inter-
faces, the I/O channels, the memory and the USB interfaces are dis-
played. In the
channels, the system monitoring, the different interfaces, the I/O chan-
nels, the memory, and the USB interfaces are displayed.
User -defined view
Hardware view
Expert Logger Manual
Januar 2018
Expert Logger
user-defined view
hardware view
(bottom image), after the software
45
device via the DataSer-
(top image) displays the software
hardware view
(bottom image),
Delphin Technology AG