Delphin Expert Logger Manual page 223

Expert Logger
This tab is enables you to make settings that apply to all channels (inputs
and outputs) of the interface. It is also possible to create separate settings
for each channel which differ to the general setting for poll string and poll
cycle and/or output time. Termination settings only apply for all input and
output channels.
Cyclic query
for all input channels and/or sent for all output channels. Do not enable the
option if you wish to create the settings per channel.
Time setting
Poll cycle
l
Sets the the time for cyclical querying of data. The current user is (re)-quer-
ied after this time has elapsed. The time must be long enough in relation to
the Pause time and the number of channels (participants) or you will receive
Expert Logger Manual
Januar 2018
: General settings on whether data is to be cyclically queried
223
Delphin Technology AG