Configuration And Operation; Overview - Delphin Expert Logger Manual

Expert Logger
4

Configuration and operation

The following paragraphs are covered in this Section:
The basic settings of the device, such as the network settings or the device
l
ID, are described in the section Device configuration.
Configuration of the display, as well as an explanation of the display's sym-
l
bols and menus, are available under Configuring and operating the display.
Channel configuration of the various I/O modules is explained in detail under
l
Configuring channels (sensors).
Settings and operation, which are the same for all
available under
The Configuration via web browser section explains the (device) settings
l
that you can apply via an internet browser.
The following functions are available only via the device's web interface:
Resetting to factory settings and updating the device's firmware. Some basic
settings are also possible, for example to the Ethernet interface or device-
clock.
The Configuring software channels section describes the various ways in
l
which to perform calculations on measurement data or between channels.
Read the Configuring interfaces section on how to use the various interfaces
l
for connecting or exchanging data with external devices.
Devices are equipped with internal memories to enable measurement data to
l
be saved. The Device memory Section explains how this storage space can
be used, for example for partitioning of different channel groups.
The Data transfer to USB memory stick Section explains how to externally
l
back up internally stored data.
See also Getting Started and

4.1 Overview

See also Getting Started
Configuration of the most important parameters, such as network settings,
can be performed using either the Web Interface from the device or the
DataService Configurator program. Settings via the Web interface are
described in the
description of the program DataService Configurator is available in the
manual on DataService Configurator. A detailed description of the pro-
gram DataService Configurator is available in the manual on
Configurator.
ClickingDataService Configurator starts the DataService background pro-
gram and establishes a connection to the devices (the default for the first
Expert Logger Manual
Januar 2018
Common device settings
Settings for all dialogues
Configuration via Web browser
27
MetiOS
devices, are
.
.
Section. A detailed
Delphin Technology AG
DataService