Channel List Tab - Delphin Expert Logger Manual

Expert Logger
4.13.3 Channel list tab
In this dialogue, you select the channels that are to be saved in this
memory group.
How often measurement data is saved depends on the various settings
(refer also to the
erance for new channels
Real-time data tolerance: The tolerances given for the channel in the Addi-
l
tional settings tab under Data reduction are also used for saving. The meas-
urement value is saved when it differs from the previously saved
measurement value by more than the value given there. The effective value
for the channel is displayed in the field Saved channels once it is adopted.
Default value: The value specified here is used for the channel that is to be
l
assigned to the group. The tolerance only applies for saving to this memory
Delphin Technology AG
Main settings
tab) and may also be influenced by the
:
256
Tol-
Expert Logger Manual
Januar 2018