Resetting Configuration - Delphin Expert Logger Manual

Expert Logger
The following figure shows an example (extract):
4.4.1.3
Resetting configuration
By clicking
factory settings. All the channels you created will be deleted.
By clicking
reset to factory settings, including the system channels and network set-
tings. All the channels you created will be deleted. This then corresponds to
the device's condition with the firmware at the time of delivery.
The process is displayed in a window:
Delphin Technology AG
Resetting the configuration to the factory setting can only be done
through the Web interface.
Resetting to factory setting cannot be
undone.
Channel default configuration
Factory default configuration
all channel settings are reset to
, all channels and all settings are
36
Expert Logger Manual
Januar 2018