Delphin Expert Logger Manual page 219

Expert Logger
Device
Device address
l
Sets the address for the device (slave).
The Port setting cannot be changed.
The symbol is displayed following configuration. Then create and con-
figure the required
Modbus channel
Depending on whether you want to output or read a signal, select
channel→ Modbus
tifi ed by
by . Refer also to
Expert Logger Manual
Januar 2018
Modbus channels
us inp
output or Modb
and a Modbus output channel
Settings for all dialogues
219
(signals).
ut. A Modbus input channel is iden-
.
Create
Delphin Technology AG