Status Generator - Delphin Expert Logger Manual

Expert Logger
4.11.22 Status generator
This software channel, e.g. for test purposes, can generate a certain
status. You can check whether the system reacts as required.
You can trigger the status immediately (upon closing the dialogue) or via a
channel (
Refer also to
Available status functions and their meaning
Selection
Wire break
Configuration
error
Invalid value
Measuring
range over-
run
Measuring
range under-
run
Hardware
error
Simulated
value
No number
(NAN = Not A
Number)
Infinite value
(INF = infin-
ity)
Inactive
Scale range
overrun
Scale range
underrun
Expert Logger Manual
Januar 2018
Set status only with trigger
Status filter Status monitoring
,
Wire break in monitored channel.
Error in monitored channel configuration.
Invalid value in monitored channel.
The measured value is outside the (positive) measuring
range of the A/D converter, that is, it is too high in the pos-
itive range.
The measured value is outside the (negative) measuring
range of the A/D converter, that is, it is too high in the neg-
ative range.
Error in the hardware, please contact the service of
phin
.
An internally generated value for testing, for example
from the PROFIBUS.
A calculation has not returned a valid number, for
example root of negative numbers.
A calculation is infinite, for example division by zero.
This is set when a channel that is output, calculated or
used in any other way is not active at the start of a meas-
urement. Thus, you can see at run time which channels
are inactive.
Scaling range exceeded.
Scaling range not met.
).
.
Description
165
Del-
Delphin Technology AG