Expert
Logger
2
Getting started
Expert
The
urement, control, and monitoring device and is fitted with many settings
and connection options. There is a range of inputs and outputs, field bus
interfaces, and software channels to enable the performance of mon-
itoring, control, and regulation tasks. The device has 2GB
memory and can function as a stand alone independent unit. Data that has
been acquired can be transferred via interfaces in runtime mode, via time-
controlled events, or via the device's available interfaces.
This section outlines:
How to set up the device.
l
Which programs must be installed.
l
How to establish a connection between a PC and the device.
l
The settings required to acquire measurement signals from the device.
l
For detailed information see these Sections:
The Section Expert
l
of all the connections, the display and the LEDs.
The Section Configuration and operation explains the different options for set-
l
ting up the device for measurement tasks. The Section describes the Expert
Logger device specific settings. Settings, which are the same for all devices
with the exception of Expert Key, are available under Common device set-
tings.
See also Configuration and operation.
The Section on Examples of connections shows the options for connecting
l
standard sensors and actuators and how to configure them.
The Section on Measurement technology notescontains general information
l
and recommendations on applying measurement technology.
Technical data is available in the Section on Technical specifications.
l
2.1 Installing the programs
Install the DVD
install the
After default installation you will find both of these symbols on your
desktop:
Expert
Logger
Manual
Januar 2018
Logger
device is designed for use as a modular meas-
Loggerdisplays and connections gives you an overview
You need administrator rights to install the pro-
gram.
ProfiSignal
DataService Configurator
. During the installation, ensure that you
as a program (and not as a service).
11
to
14GB internal
Delphin Technology AG
Need help?
Do you have a question about the Expert Logger and is the answer not in the manual?