Modbus Rtu Slave/Master - Delphin Expert Logger Manual

Expert Logger
The symbol
Then create and configure the required
4.12.4.5 Modbus RTU Slave/Master
Use the
(baud rate, number of data bits etc.) for the relevant COM interface. Refer
COM interface, UART settings
to
Use the context menu of the COM connection to create the protocol for Mod-
: Create channel →
bus
We recommend giving a unique
and, if necessary, entering a Location.
Following configuration, the
master and
required channels for the
Modbus Device (Master)
Use the context menu of the Modbus protocol (
create a Modbus device:
figurations dialogue, double click menu item
erties from the context menu. Use the dialogue to enter a name, location
and description for the external device. Set the device's (own) address in
the Modbus network and the parameters for querying Modbus users.
Delphin Technology AG
is then displayed for the channel following configuration.
Main settings
tab to enter the general settings for the interface
Modbus RTU master/slave protocol
for a Modbus RTU slave. Then create and configure the
Modbus master
Modbus external device
PROFIBUS channels
.
Channel name
, amending the
symbol is displayed for a Modbus RTU
Modbus slave.
and/or
. To open the con-
Modbus Device
216
(Signals).
.
Description
, Modbus RTU Master) to
or select Prop-
Expert Logger Manual
Januar 2018