Delphin Expert Logger Manual page 225

Expert Logger
Enter the pause length in "character times" (time duration for transmission
of a character via interface) after which a message should be considered as
ended.
Decimal separator
Enter the decimal separator here for the transmission of numerics. The
character will be used for all channels which transmit numerics.
Creating user-defined protocol
Main settings
Use the
(baud rate, number of data bits etc.) for the relevant COM interface. Refer
COM interface, UART settings.
to
Create the user-defined protocol via the COM interface's context menu:
Create channel
User-defined output channel
Create an output channel via the the context menu for UART Generic Pro-
tocol:
Expert Logger Manual
Januar 2018
tab to enter the general settings for the interface
→
User-defined protocol
225
.
Delphin Technology AG