Delphin Expert Logger Manual page 28

Expert Logger
installation is described in the Getting Started section). The DataService
Configurator dialog is split enabling a device to be selected on the left
Connections
under
The device itself is considered a 'channel' and
In the example is listed as '„
Channel configuration
Any configuration performed in the DataService Configurator is considered
a channel configuration even when not strictly concerning a measurement
channel, but rather a device interface or memory group.
Amendments to configurations to take immediate effect with the previous
settings being overwritten. The new settings are saved to the
ger
device's non-volatile memory and remain there even following a
device reset.
Open the configuration dialog for a channel by double-clicking the channel
name or right-clicking and selecting Properties from the context menu.
Objects that do not have this entry in their context menus are not con-
figurable via the DataService Configurator but act as containers, that is, as
channel groups for (more) sub-channels such as the Software channels'
group.
Channels from a channel group are displayed by clicking the cor-
responding plus sign ( ) before the group.
DataService Configurator options
Hide or show columns for the different tabs on or off:
l
View→ Left panel → Visible columns... or View→ Right panel → Visible
columns...
Set the DataService Configurator time zone: View → Timezone.
l
Change the DataService Configurator's display language via Options → Lan-
l
guage.
Suppress confirmation requests:
l
Options→ Don't prompt for confirmation.
Delphin Technology AG
and settings to be made on the right under
Expert Logger
28
Channels
'expert-logger-SN4408310'".
Expert
Expert Logger
.
Log-
Manual
Januar 2018