Sensor Type Current 0/4 Ma To 20 Ma - Delphin Expert Logger Manual

Expert Logger
measurements not within the range. Channel status values are available in
status monitoring.
Scaling
Enter two points from the sensor's characteristic curve, if possible, the
lower and upper vertexes. For a linear characteristic, measurement values
are then converted into the unit of measurement (scaling) from the sensor.
For non-linear characteristics use
pensation
as the default for the
receives the status "scale range overrun" or "scale range underrun" when
not within the range. Channel status values are available in the table in
Status monitoring
4.10.1.2
Sensor type current 0/4 mA to 20 mA
Delphin Technology AG
tab. The specified range (in the example 0bar to 10bar) is used
ProfiSignal
.
Sensor compensation
graphic display area. The channel
94
Sensor com-
. See
Expert Logger Manual
Januar 2018