Delphin Expert Logger Manual page 31

Expert Logger
To change the IP address, please tap one of the displayed IP blocks. This
takes you to a further view:
Here, by tapping '+', or '-', you can change individual figures in the red
highlighted IP blocks. Using the arrows to the left or right, you can toggle
between individual IP blocks.
Important: your settings are made only after clicking "Back" and then
"Save". To discard changes made, please tap on "Back" and then "Cancel".
Net mask
Here, by tapping '+', or '-', you can set the desired net mask. You may set
only allowed values for the net mask.
Important: your settings are made only when you click "Save". To discard
changes made, please tap "Cancel".
Expert Logger Manual
Delphin Technology AG
31
Januar 2018