Trigger:timeout - Rigol DS7034 User Programming Manual

RIGOL

:TRIGger:TIMeout

Command List:
:TRIGger:TIMeout:SOURce

:TRIGger:TIMeout:SLOPe

:TRIGger:TIMeout:TIME

:TRIGger:TIMeout:LEVel

:TRIGger:TIMeout:SOURce
Syntax :TRIGger:TIMeout:SOURce <source>
:TRIGger:TIMeout:SOURce?
Description Sets or queries the trigger source of Timeout trigger.
Parameter Name
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format
D15, CHAN1, CHAN2, CHAN3, or CHAN4.
Example
:TRIGger:TIMeout:SOURce CHANnel2
:TRIGger:TIMeout:SOURce?
:TRIGger:TIMeout:SLOPe
Syntax :TRIGger:TIMeout:SLOPe <slope>
:TRIGger:TIMeout:SLOPe?
Description Sets or queries the edge type of Timeout trigger.
Parameter
Name
<slope>
Remarks POSitive: starts timing when the rising edge of the input signal passes through the

trigger level.
NEGative: starts timing when the falling edge of the input signal passes through

the trigger level.
RFALl: starts timing when any edge of the input signal passes through the trigger

level.
Return The query returns POS, NEG, or RFAL.
Format
Example :TRIGger:TIMeout:SLOPe NEGative
:TRIGger:TIMeout:SLOPe?
2-180
Type Range
{D0|D1|D2|D3|D4|D5|D6|D7|D8|
Discrete D9|D10|D11|D12|D13|D14|D15|
CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Type Range
Discrete {POSitive|NEGative|RFALl}
/*Sets the trigger source to CH2.*/
/*The query returns CHAN2.*/
/*Sets the edge type to NEGative.*/
/*The query returns NEG.*/
MSO7000/DS7000 Programming Guide
Chapter 2 Command System
Default
CHANnel1
Default
POSitive