Parameter Type; Command Abbreviation - Rigol DS7034 User Programming Manual

RIGOL

Parameter Type

1. Bool
The parameter can be set to ON, OFF, 1, or 0. For example,
:SYSTem:BEEPer <bool>
:SYSTem:BEEPer?
Wherein,
<bool> can be set to {{1|ON}|{0|OFF}}.
The query returns 1 or 0.
2. Discrete
The parameter can be any of the values listed. For example,
:ACQuire:TYPE <type>
:ACQuire:TYPE?
Wherein,
<type> can be set to NORMal, AVERages, or PEAK.
The query returns NORM, AVER, or PEAK.
3. Integer
Unless otherwise specified, the parameter can be any integer (NR1 format) within the effective value
range.
Note: Do not set the parameter to a decimal, otherwise, errors will occur.
For example,
:DISPlay:GBRightness <brightness>
:DISPlay:GBRightness?
Wherein, <brightness> can be set to an integer ranging from 1 to 100.
The query returns an integer ranging from 1 to 100.
4. Real
The parameter can be any real number within the effective value range, and this command accepts
parameter input in decimal (NR2 format) and scientific notation (NR3 format). For example,
:TRIGger:TIMeout:TIME <time>
:TRIGger:TIMeout:TIME?
Wherein, <time> can be set to any real number ranging from 1.6E-8 (i.g. 16 ns) to 1E+1 (i.g. 10 s).
The query returns a real number in scientific notation.
5. ASCII String
The parameter can be the combinations of ASCII characters.
For example,
:SYSTem:OPTion:INSTall <license>
Wherein, <license> can be set to
DS7000-PWR@3AEBC07E6C31F82B78A1C401DC2E3AC2CC9431B57F60D1E1CB712F8682C93609A60
5F8577BFDE920373062BE226289A27C134E2C91BF80CB00F8011AC181FD40.

Command Abbreviation

All the commands are case-insensitive. They can all be in upper case or in lower case. If abbreviation is
used, you must input all the capital letters in the command. For example,
:DISPlay:GBRightness?
can be abbreviated as
:DISP:GBR?
1-2
Chapter 1 SCPI Command Overview
MSO7000/DS7000 Programming Guide