Rigol DS7034 User Programming Manual page 74

RIGOL
:CURSor:TRACk:AXValue?
Syntax :CURSor:TRACk:AXValue?
Description Queries the X value at Cursor A in the track mode of cursor measurement. The unit is
determined by the amplitude unit selected for the currently corresponding channel.
Return Format
The query returns the X value at Cursor A in scientific notation.
:CURSor:TRACk:AYValue?
Syntax :CURSor:TRACk:AYValue?
Description Queries the Y value at Cursor A in the track mode of cursor measurement. The unit is
the same as that selected for the current channel.
Return Format The query returns the Y value at Cursor A in scientific notation.
:CURSor:TRACk:BXValue?
Syntax
:CURSor:TRACk:BXValue?
Description Queries the X value at Cursor B in the track mode of cursor measurement. The unit is
determined by the amplitude unit selected for the currently corresponding channel.
Return Format The query returns the X value at Cursor B in scientific notation.
:CURSor:TRACk:BYValue?
Syntax :CURSor:TRACk:BYValue?
Description Queries the Y value at Cursor B in the track mode of cursor measurement. The unit is
the same as that selected for the current channel.
Return Format The query returns the Y value at Cursor B in scientific notation.
:CURSor:TRACk:XDELta?
Syntax :CURSor:TRACk:XDELta?
Description Queries the difference (△ X) between the X value at Cursor A and the X value at Cursor
B in the track mode of cursor measurement. The default unit is s.
Return Format
The query returns the current difference in scientific notation.
:CURSor:TRACk:YDELta?
Syntax
:CURSor:TRACk:YDELta?
Description Queries the difference (△ Y) between the Y value at Cursor A and the Y value at Cursor
B in the track mode of cursor measurement. The unit is the same as that selected for
the current channel.
Return Format The query returns the current difference in scientific notation.
2-60
Chapter 2 Command System
MSO7000/DS7000 Programming Guide