Save:waveform; Save:status; Load:setup - Rigol DS7034 User Programming Manual

RIGOL

:SAVE:WAVeform

Syntax
:SAVE:WAVeform<path>
Description Saves the waveform data to the internal or external memory.
Parameter
Name
<path>
Remarks <path> includes the file storage location and the filename with a suffix. By default,
its suffix is in ".bin" format. The filename suffixed with ".csv" and ".wfm" are also
supported. If the specified storage location already contains a file with the same
filename, the original file will be overwritten.
Example :SAVE:WAVeform D:\123.wfm /*Saves the waveform file to the external memory

:SAVE:STATus?

Syntax :SAVE:STATus?
Description Queries the saving status of the internal memory or the external USB storage device.
Return The query returns 0 or 1 (when the saving operation is completed).
Format

:LOAD:SETup

Syntax :LOAD:SETup <path>
Description Loads the setup file of the oscilloscope from the specified path.
Parameter
Name
<path>
Remarks <path> includes the file storage location and the filename with a suffix. By default, its
suffix is in ".stp" format. If the specified storage location already contains a file with the
same filename, the original file will be overwritten.
Example :LOAD:SETup D:\123.stp
2-130
Type Range
Refer to
ASCII String
Disk D, with the filename 123.wfm.*/
Type Range
Refer to
ASCII String
/*Loads the setup file "123.stp" from the external memory
Disk D.*/
Remarks
Remarks
MSO7000/DS7000 Programming Guide
Chapter 2 Command System
Default
——
Default
——