Bus<N>:Flexray (Option) - Rigol DS7034 User Programming Manual

Chapter 2 Command System
:BUS<n>:FLEXray (Option)
The :BUS<n>:FLEXray commands are used to set the relevant parameters for FLEXray decoding.
Command List:
:BUS<n>:FLEXray:BAUD

:BUS<n>:FLEXray:SOURce

:BUS<n>:FLEXray:SPOint

:BUS<n>:FLEXray:STYPe

:BUS<n>:FLEXray:BAUD
Syntax :BUS<n>:FLEXray:BAUD <baud>
:BUS<n>:FLEXray:BAUD?
Description Sets or queries the signal rate of FlexRay decoding. The default unit is bps.
Parameter
Name
<n>
<baud>
Return The query returns 2500000, 5000000, or 10000000.
Format
Example :BUS1:FLEXray:BAUD 2500000
:BUS1:FLEXray:BAUD?
:BUS<n>:FLEXray:SOURce
Syntax :BUS<n>:FLEXray:SOURce <source>
:BUS<n>:FLEXray:SOURce?
Description Sets or queries the source channel of FlexRay decoding.
Parameter
Name
<n>
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format
D15, CHAN1, CHAN2, CHAN3, or CHAN4.
Example :BUS1:FlexRay:SOURce D0
:BUS1:FlexRay:SOURce?
MSO7000/DS7000 Programming Guide
Type Range
Discrete {1|2|3|4}
Discrete {2500000|5000000|10000000}
/*Sets the signal rate of FlexRay decoding to
2500000 bps.*/
/*The query returns 2500000.*/
Type Range
Discrete {1|2|3|4}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|
Discrete D12|D13|D14|D15|CHANnel1|CHANnel2|CHAN
nel3|CHANnel4}
/*Sets the source channel of FlexRay decoding to D0.*/
/*The query returns D0.*/
RIGOL
Default
——
10000000
Default
——
CHANnel1
2-31