Rigol DS7034 User Programming Manual page 29

Chapter 2 Command System
Remarks Noise rejection can remove the data that last not enough time on the bus and

eliminate the burst glitch in the actual circuit.
When the noise rejection is enabled, send the

command to set the required rejection time.
Return The query returns 1 or 0.
Format
Example :BUS1:PARallel:NREJect ON
:BUS1:PARallel:NREJect?
:BUS<n>:PARallel:NRTime
Syntax
:BUS<n>:PARallel:NRTime <time>
:BUS<n>:PARallel:NRTime?
Description Sets or queries the noise rejection time of Parallel decoding. The default unit is s.
Parameter
Name
<n>
<time>
Return
The query returns the noise rejection time in scientific notation.
Format
Example
:BUS1:PARallel:NRTime 0.01
:BUS1:PARallel:NRTime?
MSO7000/DS7000 Programming Guide
/*Enables the noise rejection function.*/
/*The query returns 1.*/
Type Range
Discrete {1|2|3|4}
Real 0 ns to 1 s
/*Sets the noise rejection time to 10 ms.*/
/*The query returns 1.000000E-2.*/
:BUS<n>:PARallel:NRTime
RIGOL
Default
——
0.00 s
2-15