Timebase Commands; Timebase:delay:enable; Timebase:delay:offset - Rigol DS7034 User Programming Manual

RIGOL

:TIMebase Commands

The :TIMebase commands are used to set the horizontal system. For example, enable the delayed sweep,
set the horizontal time base mode, etc.
Command List:

:TIMebase:DELay:ENABle



:TIMebase:DELay:OFFSet


:TIMebase:DELay:SCALe

:TIMebase[:MAIN]:OFFSet

:TIMebase[:MAIN]:SCALe

:TIMebase:MODE

:TIMebase:HREFerence:MODE

:TIMebase:HREFerence:POSition

:TIMebase:VERNier

:TIMebase:DELay:ENABle
Syntax :TIMebase:DELay:ENABle <bool>
:TIMebase:DELay:ENABle?
Description Turns on or off the delayed sweep; or queries the on/off status of the delayed sweep.
Parameter
Name
<bool>
Remarks Delayed sweep can be used to enlarge a length of waveform horizontally to view
waveform details.
Return The query returns 1 or 0.
Format
Example
:TIMebase:DELay:ENABle ON
:TIMebase:DELay:ENABle?
:TIMebase:DELay:OFFSet
Syntax :TIMebase:DELay:OFFSet <offset>
:TIMebase:DELay:OFFSet?
Description Sets or queries the offset of the delayed time base. The default unit is s.
Parameter
Name
<offset>
Remarks LeftTime = 5 × MainScale - MainOffset
RightTime = 5 × MainScale + MainOffset
DelayRange = 10 × DelayScale
Wherein, MainScale indicates the current main time base scale, MainOffset indicates
the current main time base offset, and DelayScale indicates the current delay time base
2-158
Type Range
Bool {{1|ON}|{0|OFF}}
/*Enables the delayed sweep.*/
/*The query returns 1.*/
Type Range
-(LeftTime - DelayRange/2) to (RightTime -
Real
DelayRange/2)
Chapter 2 Command System
Default
0|OFF
Default
0
MSO7000/DS7000 Programming Guide