Trigger:windows - Rigol DS7034 User Programming Manual

Chapter 2 Command System

:TRIGger:WINDows

Command List:
:TRIGger:WINDows:SOURce

:TRIGger:WINDows:SLOPe

:TRIGger:WINDows:POSition

:TRIGger:WINDows:TIME

:TRIGger:WINDows:ALEVel

:TRIGger:WINDows:BLEVel

:TRIGger:WINDows:SOURce
Syntax :TRIGger:WINDows:SOURce <source>
:TRIGger:WINDows:SOURce?
Description Sets or queries the trigger source of Window trigger.
Parameter
Name
<source>
Return The query returns CHAN1, CHAN2, CHAN3, or CHAN4.
Format
Example :TRIGger:WINDows:SOURce CHANnel2
:TRIGger:WINDows:SOURce?
:TRIGger:WINDows:SLOPe
Syntax :TRIGger:WINDows:SLOPe <type>
:TRIGger:WINDows:SLOPe?
Description Sets or queries the window type of Window trigger.
Parameter
Name
<type>
Remarks

greater than the preset high trigger level.

is smaller than the preset low trigger level.

voltage level meets the preset trigger level.
Return The query returns POS, NEG, or RFAL.
Format
Example :TRIGger:WINDows:SLOPe NEGative
:TRIGger:WINDows:SLOPe?
MSO7000/DS7000 Programming Guide
Type Range
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Type Range
Discrete {POSitive|NEGative|RFALl}
POSitive: triggers on the rising edge of the input signal when the voltage level is
NEGative: triggers on the falling edge of the input signal when the voltage level
RFALl: triggers on either the rising or falling edge of the input signal when the
/*Sets the trigger source to CH2.*/
/*The query returns CHAN2.*/
/*Sets the window type to NeGative.*/
/*The query returns NEG.*/
RIGOL
Default
CHANnel1
Default
POSitive
2-185