Mask:x; Mask:y; Mask:create; Mask:reset - Rigol DS7034 User Programming Manual

RIGOL

:MASK:X

Syntax
:MASK:X <x>
:MASK:X?
Description Sets or queries the horizontal adjustment parameter of the pass/fail test mask. The
default unit is div.
Parameter Name
<x>
Return The query returns the current horizontal adjustment parameter in scientific notation.
Format
Example :MASK:X 0.28
:MASK:X?

:MASK:Y

Syntax :MASK:Y <y>
:MASK:Y?
Description Sets or queries the vertical adjustment parameter of the pass/fail test mask. The default
unit is div.
Parameter
Name
<y>
Return The query returns the current vertical adjustment parameter in scientific notation.
Format
Example :MASK:Y 0.36
:MASK:Y?

:MASK:CREate

Syntax :MASK:CREate
Description Creates the pass/fail test mask with the currently set horizontal and vertical adjustment
parameters.
Description This command is only valid when the pass/fail test function is enabled and not in running
state.

:MASK:RESet

Syntax :MASK:RESet
Description Resets the number of frames that passed and failed the pass/fail test, as well as the total
number of frames.
2-92
Type Range
Real 0.01 div to 2 div
/*Sets the horizontal adjustment parameter to 0.28 div.*/
/*The query returns 2.800000E-1.*/
Type Range
Real 0.04 div to 2 div
/*Sets the vertical adjustment parameter to 0.36 div.*/
/*The query returns 3.600000E-1.*/
Chapter 2 Command System
MSO7000/DS7000 Programming Guide
Default
0.24 div
Default
0.48 div