Rigol DS7034 User Programming Manual page 41

Chapter 2 Command System
:BUS<n>:SPI:TIMeout:TIME
Syntax :BUS<n>:SPI:TIMeout:TIME <time>
:BUS<n>:SPI:TIMeout:TIME?
Description Sets or queries the timeout value of SPI decoding. The default unit is s.
Parameter
Name
<n>
<time>
Remarks The timeout must be greater than the maximum clock pulse width and less than

the idle time between frames.
This setting command is only valid in timeout mode.

Return The query returns the timeout value in scientific notation.
Format
Example
:BUS1:SPI:TIMeout:TIME 0.000005
:BUS1:SPI:TIMeout:TIME?
:BUS<n>:SPI:SS:SOURce
Syntax :BUS<n>:SPI:SS:SOURce <source>
:BUS<n>:SPI:SS:SOURce?
Description Sets or queries the source channel of the CS line of SPI decoding.
Parameter
Name
<n>
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format D15, CHAN1, CHAN2, CHAN3, or CHAN4.
Example :BUS1:SPI:SS:SOURce D0
:BUS1:SPI:SS:SOURce?
MSO7000/DS7000 Programming Guide
Type Range
Discrete {1|2|3|4}
Real 8 ns to 10 s
Type Range
Discrete {1|2|3|4}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D11|
Real D12|D13|D14|D15|CHANnel1|CHANnel2|CHAN
nel3|CHANnel4}
/*Sets the source channel of CS line of SPI decoding to
D0.*/
/*The query returns D0.*/
/*Sets the timeout value to 5 μs.*/
/*The query returns 5.000000E-6.*/
RIGOL
Default
——
1 μs
Default
——
CHANnel1
2-27