Excel Programming Example - Rigol DS7034 User Programming Manual
Mso7000 series; ds7000 series; digital oscilloscope
Hide thumbs
Also See for DS7034:
- User manual (42 pages) ,
- User manual (374 pages) ,
- User manual (370 pages)
Table of Contents
Advertisement
Chapter 3 Programming Examples
Excel Programming Example
Program used in this instance: Microsoft Excel 2007
Function realized in this example: send the *IDN? command and read the instrument information.
1.
Open a new Macro-enabled Excel file and name it "MSO7000_Demo_Excel.xlsm".
2.
Run the MSO7000_Demo_Excel.xlsm file. Click FileOptions at the upper-left corner of the Excel file
to open the interface as shown in the figure below. Click Customize Ribbon at the left, check
Developer and click OK. At this point, the Excel menu bar displays the Developer menu.
3.
Enter a device resource descriptor into a cell of the file as shown in the figure below. For example, the
device resource descriptor is USB0::0x1AB1::0x0514::DS7B200112345::INSTR. Input it into
SHEET1.CELLS(1,2) (i.g. the B1 cell in Sheet1). Click the Developer menu and select the Visual
Basic option to open the Microsoft Visual Basic.
MSO7000/DS7000 Programming Guide
RIGOL
3-3
Advertisement
Table of Contents
