Bus<N>:Rs232 (Option) - Rigol DS7034 User Programming Manual

RIGOL
:BUS<n>:RS232 (Option)
The :BUS<n>:RS232 commands are used to set relevant parameters for RS232 decoding.
Command List:
:BUS<n>:RS232:TX

:BUS<n>:RS232:RX

:BUS<n>:RS232:POLarity

:BUS<n>:RS232:ENDian

:BUS<n>:RS232:BAUD

:BUS<n>:RS232:DBITs

:BUS<n>:RS232:SBITs

:BUS<n>:RS232:PARity

:BUS<n>:RS232:PACKet

:BUS<n>:RS232:PEND

:BUS<n>:RS232:TX
Syntax :BUS<n>:RS232:TX <source>
:BUS<n>:RS232:TX?
Description Sets or queries the TX channel source of RS232 decoding.
Parameter
Name
<n>
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format D15, CHAN1, CHAN2, CHAN3, CHAN4, or OFF.
Example :BUS1:RS232:TX D0
:BUS1:RS232:TX?
:BUS<n>:RS232:RX
Syntax :BUS<n>:RS232:RX <source>
:BUS<n>:RS232:RX?
Description
Sets or queries the RX channel source of RS232 decoding.
Parameter
Name
<n>
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
2-16
Type Range
Discrete {1|2|3|4}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|
Discrete D9|D10|D11|D12|D13|D14|D15|
CHANnel1|CHANnel2|CHANnel3|CHANnel4|OFF}
/*Sets the TX channel source of RS232 decoding to D0.*/
/*The query returns D0.*/
Type Range
Discrete {1|2|3|4}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|
Discrete D9|D10|D11|D12|D13|D14|D15|
CHANnel1|CHANnel2|CHANnel3|CHANnel4|OFF}
Chapter 2 Command System
MSO7000/DS7000 Programming Guide
Default
——
OFF
Default
——
OFF