RIGOL
:SYSTem:SSAVEr:TIME
Syntax
:SYSTem:SSAVEr:TIME <time>
:SYSTem:SSAVEr:TIME?
Description
Sets or queries the screen saver time. The default unit for the value is minute.
Parameter
Name
<time>
Remarks
When the oscilloscope enters the idle state and holds for a specified time, the screen
saver program will be enabled.
Return
The query returns an integer ranging from 1 to 999.
Format
Example
:SYSTem:SSAVEr:TIME 10
:SYSTem:SSAVEr:TIME?
:SYSTem:TIME
Syntax
:SYSTem:TIME <hours>,<minutes>,<seconds>
:SYSTem:TIME?
Description
Sets or queries the system time.
Parameter
Name
<hours>
<minutes>
<seconds>
Remarks
There is a certain delay between the return time value and the set time value due to the
command response time and other factors.
Return
The query returns the system time in strings.
Format
Example
:SYSTem:TIME 16,10,17
:SYSTem:TIME?
:SYSTem:LOCKed
Syntax
:SYSTem:LOCKed <bool>
:SYSTem:LOCKed?
Description
Turns on or off the keyboard lock function; or queries whether the keyboard is locked or
unlocked.
Parameter
Name
<bool>
Return
The query returns 1 or 0.
Format
Example
:SYSTem:LOCKed ON
:SYSTem:LOCKed?
2-156
Type
Range
1 to 999
Integer
Type
Range
Integer
0 to 23
Integer
0 to 59
Integer
0 to 59
/*Sets the system time to 16:10:17.*/
/*The query returns 16,10,17*/
Type
Range
Bool
{{1|ON}|{0|OFF}}
/*Enables the keyboard lock function.*/
/*The query returns 1.*/
/*Sets the screen saver time to 10 minutes.*/
/*The query returns 10.*/
MSO7000/DS7000 Programming Guide
Chapter 2 Command System
Default
30
Default
——
——
——
Default
0|OFF