Bus<N>:Iic (Option) - Rigol DS7034 User Programming Manual

Chapter 2 Command System
:BUS<n>:IIC (Option)
The :BUS<n>:IIC commands are used to set relevant parameters for I2C decoding.
Command List:
:BUS<n>:IIC:SCLK:SOURce

:BUS<n>:IIC:SDA:SOURce

:BUS<n>:IIC:ADDRess

:BUS<n>:IIC:SCLK:SOURce
Syntax
:BUS<n>:IIC:SCLK:SOURce <source>
:BUS<n>:IIC:SCLK:SOURce?
Description Sets or queries the clock source of I2C decoding.
Parameter
Name
<n>
<source>
Return
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format D15, CHAN1, CHAN2, CHAN3, or CHAN4.
Example :BUS1:IIC:SCLK:SOURce D0
:BUS1:IIC:SCLK:SOURce?
:BUS<n>:IIC:SDA:SOURce
Syntax :BUS<n>:IIC:SDA:SOURce <source>
:BUS<n>:IIC:SDA:SOURce?
Description Sets or queries the data channel source of I2C decoding.
Parameter
Name
<n>
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format D15, CHAN1, CHAN2, CHAN3, or CHAN4.
Example
:BUS1:IIC:SDA:SOURce D0 /*Sets the data channel source of I2C decoding to D0.*/
:BUS1:IIC:SDA:SOURce? /*The query returns D0.*/
MSO7000/DS7000 Programming Guide
Type Range
Discrete {1|2|3|4}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D1
Discrete 1|D12|D13|D14|D15|CHANnel1|CHANnel2|C
HANnel3|CHANnel4}
/*Sets the clock source of I2C decoding to D0.*/
/*The query returns D0.*/
Type Range
Discrete {1|2|3|4}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D1
Discrete 1|D12|D13|D14|D15|CHANnel1|CHANnel2|C
HANnel3|CHANnel4}
RIGOL
Default
——
CHANnel1
Default
——
CHANnel1
2-21