Trigger:nreject; Trigger:edge - Rigol DS7034 User Programming Manual

Chapter 2 Command System

:TRIGger:NREJect

Syntax
:TRIGger:NREJect <bool>
:TRIGger:NREJect?
Description Turns on or off noise rejection; or queries the on/off status of noise rejection.
Parameter Name
<bool>
Remarks Noise rejection reduces the possibility of the Noise trigger.

This command is only available for the External trigger in which the analog

channel is selected as the source.
Return
The query returns 1 or 0.
Format
Example :TRIGger:NREJect ON
:TRIGger:NREJect?

:TRIGger:EDGE

Command List:
:TRIGger:EDGE:SOURce

:TRIGger:EDGE:SLOPe

:TRIGger:EDGE:LEVel

:TRIGger:EDGE:SOURce
Syntax :TRIGger:EDGE:SOURce <source>
:TRIGger:EDGE:SOURce?
Description Sets or queries the trigger source of Edge trigger.
Parameter Name
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format D15, CHAN1, CHAN2, CHAN3, CHAN4, ACL, or EXT.
Example
:TRIGger:EDGE:SOURce CHANnel1
:TRIGger:EDGE:SOURce?
:TRIGger:EDGE:SLOPe
Syntax :TRIGger:EDGE:SLOPe <slope>
:TRIGger:EDGE:SLOPe?
Description Sets or queries the edge type of Edge trigger.
Parameter Name
<slope>
MSO7000/DS7000 Programming Guide
Type Range
Bool {{1|ON}|{0|OFF}}
/*Enables the noise rejection function.*/
/*The query returns 1.*/
Type Range
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D
11|D12|D13|D14|D15|CHANnel1|CHANnel2
Discrete
|CHANnel3|CHANnel4|ACLine|EXT}
Type Range
Discrete {POSitive|NEGative|RFALl}
/*Sets the trigger source to CH1.*/
/*The query returns CHAN1.*/
RIGOL
Default
0|OFF
Default
CHANnel1
Default
POSitive
2-165