Rigol DS7034 User Programming Manual page 214

RIGOL
:TRIGger:RS232:WIDTh
Syntax :TRIGger:RS232:WIDTh <width>
:TRIGger:RS232:WIDTh?
Description Sets or queries the data width of RS232 trigger when the trigger condition is
"Data".
Parameter
Name
<width>
Return Format The query returns 5, 6, 7, or 8.
Example :TRIGger:RS232:WIDTh 6
:TRIGger:RS232:WIDTh?
:TRIGger:RS232:BAUD
Syntax :TRIGger:RS232:BAUD <baud>
:TRIGger:RS232:BAUD?
Description
Sets or queries the baud rate of RS232 trigger. The default unit is bps.
Parameter
Name
<baud>
Remarks If the baud rate is set to a value with "M", then "A" should be added at the end of
the value. For example, if you send 5 M, you need to send 5 MA.
Return Format The query returns an integer ranging from 1 bps to 20 Mbps.
Example :TRIGger:RS232:BAUD 4800
:TRIGger:RS232:BAUD?
:TRIGger:RS232:LEVel
Syntax :TRIGger:RS232:LEVel <level>
:TRIGger:RS232:LEVel?
Description
Sets or queries the trigger level of RS232 trigger. The unit is the same as that of the
current amplitude.
Parameter
Name
<level>
Remarks For VerticalScale, refer to the
the
Return The query returns the trigger level in scientific notation.
Format
Example :TRIGger:RS232:LEVel 0.16
:TRIGger:RS232:LEVel?
2-200
Type
Discrete
Type
Integer
Type
Real
:CHANnel<n>:OFFSet
Range
{5|6|7|8}
/*Sets the data width to 6.*/
/*The query returns 6.*/
Range
1 bps to 20 Mbps
/*Sets the baud rate to 4800bps.*/
/*The query returns 4800.*/
Range
(-5 × VerticalScale - OFFSet) to
(5 × VerticalScale - OFFSet)
:CHANnel<n>:SCALe
command.
/*Sets the trigger level to 160 mV.*/
/*The query returns 1.600000E-1.*/
Chapter 2 Command System
Default
8
Default
9600 bps
Default
0 V
command; for OFFSet, refer to
MSO7000/DS7000 Programming Guide