Rigol DS7034 User Programming Manual page 184

RIGOL
:TRIGger:SLOPe:TUPPer
Syntax :TRIGger:SLOPe:TUPPer <time>
:TRIGger:SLOPe:TUPPer?
Description Sets or queries the upper time limit value of the Slope trigger. The default unit is s.
Parameter
Name
<time>
Remarks
The set upper limit cannot be smaller than the lower limit, otherwise, the lower limit
will be automatically changed.
Return The query returns the upper time limit in scientific notation.
Format
Example :TRIGger:SLOPe:TUPPer 0.000003
:TRIGger:SLOPe:TUPPer?
:TRIGger:SLOPe:TLOWer
Syntax
:TRIGger:SLOPe:TLOWer <time>
:TRIGger:SLOPe:TLOWer?
Description Sets or queries the lower time limit value of the Slope trigger. The default unit is s.
Parameter
Name
<time>
Remarks The set lower limit must be smaller than the upper limit, otherwise, the upper limit will
be automatically changed.
Return The query returns the lower time limit in scientific notation.
Format
Example
:TRIGger:SLOPe:TLOWer 0.000000020
:TRIGger:SLOPe:TLOWer?
:TRIGger:SLOPe:WINDow
Syntax :TRIGger:SLOPe:WINDow <window>
:TRIGger:SLOPe:WINDow?
Description Sets or queries the vertical window type of Slope trigger.
Parameter Name
<window>
Remarks TA: only adjusts the upper limit of the trigger level.


TB: only adjust the lower limit of the trigger level.

TAB: adjusts the upper and lower limits of the trigger level at the same time.
Return The query returns TA, TB, or TAB.
Format
Example
:TRIGger:SLOPe:WINDow TB
:TRIGger:SLOPe:WINDow?
2-170
Type Range
Real Lower limit to 10 s
/*Sets the upper time limit to 3 μs.*/
/*The query returns 3.000000E-6.*/
Type Range
Real 2 ns to upper limit
Type Range
Discrete {TA|TB|TAB}
/*Sets the vertical window type to TB.*/
/*The query returns TB.*/
Chapter 2 Command System
Default
1 μs
Default
1 μs
/*Sets the lower time limit to 20 ns.*/
/*The query returns 2.000000E-8.*/
Default
TA
MSO7000/DS7000 Programming Guide