Reference Commands; Reference:display; Reference:source - Rigol DS7034 User Programming Manual

Chapter 2 Command System

:REFerence Commands

The :REFerence commands are used to set relevant parameters for reference waveforms.
Command List:

:REFerence:DISPlay



:REFerence:SOURce


:REFerence:VSCale

:REFerence:VOFFset

:REFerence:RESet

:REFerence:CURRent

:REFerence:SAVE

:REFerence:COLor

:REFerence:LABel:ENABle

:REFerence:LABel:CONTent

:REFerence:DISPlay
Syntax
:REFerence:DISPlay <bool>
:REFerence:DISPlay?
Description Turns on or off the REF function; or queries the on/off status of the REF function.
Parameter
Name
<bool>
Return The query returns 1 or 0.
Format
Example :REFerence:DISPlay ON
:REFerence:DISPlay?
:REFerence:SOURce
Syntax :REFerence:SOURce <ref>,<chan>
:REFerence:SOURce? <ref>
Description
Sets or queries the source of the specified reference channel.
Parameter
Name
<ref>
<source>
Remarks Only the currently enabled channel can be selected as the source of the specified
reference channel.
Return
The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
MSO7000/DS7000 Programming Guide
Type Range
Bool {{1|ON}|{0|OFF}}
/*Enables the REF function.*/
/*The query returns 1.*/
Type Range
Discrete {1|2|3|4|5|6|7|8|9|10}
{D0|D1|D2|D3|D4|D5|D6|D7|D8|
D9|D10|D11|D12|D13|D14|D15|
Discrete
CHANnel1|CHANnel2|CHANnel3|CHANne
l4|MATH1|MATH2|MATH3|MATH4}
RIGOL
Default
0|OFF
Default
——
CHANnel1
2-123