Rigol DS7034 User Programming Manual page 66

RIGOL
:CURSor:MANual:SOURce
Syntax :CURSor:MANual:SOURce <source>
:CURSor:MANual:SOURce?
Description Sets or queries the channel source of the manual mode of cursor measurement.
Parameter
Name
<source>
Remarks Only the currently enabled channel can be selected as the channel source.

When LA is selected, the cursor type cannot be set to Y (:CURSor:MANual:TYPE).

Return The query returns CHAN1, CHAN2, CHAN3, CHAN4, MATH1, MATH2, MATH3, MATH4,
Format LA, or NONE.
Example :CURSor:MANual:SOURce CHANnel2
:CURSor:MANual:SOURce?
:CURSor:MANual:TUNit
Syntax
:CURSor:MANual:TUNit <unit>
:CURSor:MANual:TUNit?
Description Sets or queries the horizontal unit in the manual mode of cursor measurement.
Parameter
Name
<unit>
Remarks SECond: in the measurement results, AX, BX, and △ X are expressed in "s"; 1/△X in

"Hz".
HZ: in the measurement results, AX, BX, and △ X are expressed in "Hz"; 1/△X in

"s".
DEGRee: in the measurement results, AX, BX, and △ X are expressed in "°".

PERCent: in the measurement results, AX, BX, and △ X are expressed in

percentage.
Return The query returns SEC, HZ, DEGR, or PERC.
Format
Example :CURSor:MANual:TUNit DEGRee
:CURSor:MANual:TUNit?
2-52
Type Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4|
Discrete
MATH1|MATH2|MATH3|MATH4|LA|NONE}
Type Range
Discrete {SECond|HZ|DEGRee|PERCent}
/*Sets the channel source to CH2.*/
/*The query returns CHAN2.*/
/*Sets the horizontal unit to DEGRee.*/
/*The query returns DEGR.*/
MSO7000/DS7000 Programming Guide
Chapter 2 Command System
Default
CHANnel1
Default
SECond