Rigol DS7034 User Programming Manual page 46

RIGOL
:BUS<n>:FLEXray:SPOint
Syntax :BUS<n>:FLEXray:SPOint <spoint>
:BUS<n>:FLEXray:SPOint?
Description Sets or queries the sample point position of FlexRay decoding (expressed in %).
Parameter
Name
<n>
<spoint>
Remarks Sample point is a point within a bit's time. The oscilloscope samples the bit level at this
point. The sample point position is expressed as the ratio of "time from the bit start to
the sample point" to "bit time", in %.
Return The query returns an integer ranging from 10 to 90.
Format
Example
:BUS1:FLEXray:SPOint 70
:BUS1:FLEXray:SPOint?
:BUS<n>:FLEXray:STYPe
Syntax :BUS<n>:FLEXray:STYPe <stype>
:BUS<n>:FLEXray:STYPe?
Description
Sets or queries the signal type of FlexRay decoding.
Parameter
Name
<n>
<stype>
Return The query returns BP, BM, or RT.
Format
Example :BUS1:FLEXray:STYPe BM
:BUS1:FLEXray:STYPe?
2-32
Type Range
Discrete {1|2|3|4}
Integer 10 to 90
/*Sets the sample point position of FlexRay decoding to
70%.*/
/*The query returns 70.*/
Type Range
Discrete {1|2|3|4}
Discrete {BP|BM|RT}
/*Sets the signal type of FlexRay decoding to BM.*/
/*The query returns BM.*/
Chapter 2 Command System
Default
——
50
Default
——
BP
MSO7000/DS7000 Programming Guide